We will be doing system maintenance on Saturday, April 12th. You may experience a longer than expected online response time during the hours of 8:00 AM – 5:00 PM. We apologize for the inconvenience.
loading content
3M 7000006133
3M™ 7000006133 8420 Splice Cold Shrink Connector Insulator, 30.1 mm Dia Min, 13.9 mm Dia Max, 1400 psi Tensile Strength, EPDM Rubber Insulation
3M 7000006133
3M™ 7000006133 8420 Splice Cold Shrink Connector Insulator, 30.1 mm Dia Min, 13.9 mm Dia Max, 1400 psi Tensile Strength, EPDM Rubber InsulationBrand3M
MFG #7000006133
Werner Part #2369816
UPC054007344582
Brand3M
MFG #7000006133
Werner Part #2369816
UPC054007344582
Product Description
3M™ Cold Shrink Connector Insulator, Splice, Series: 8420, 30.1 mm Diameter Minimum, 13.9 mm Diameter Maximum, 1400 psi Tensile Strength, Elongation: 7.5, 365 V/mil Dielectric Strength, EPDM Rubber Insulation, Black
Attributes
Documents
Applications
Features
Specifications
Attributes
Cable EntryWire & Cable
ColorBlack
Country of OriginUS
Manufacturer3M
MaterialEPDM Rubber Insulation
Series8420
Tensile Strength1400 psi
Type / StyleSplice
Documents
Applications
Copper or Aluminum Conductors, Direct Burial and Submersible, Indoor and Outdoor Applications
Features
- Copper conductor with polyolefin foam
- No torches or heat required, good thermal stability
- Seals tight, retains its resiliency and pressure even after prolonged years of aging and exposure
- Excellent wet electrical properties
- Tough rubber formulation withstands backfilling
- Water-resistant, no mastic or tape required to seal
- Resists acids, alkali and ozone
- Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splicing rated up to 1000 volts
- Physical protection and moisture sealing for air insulated connectors and lugs such as spacer cable and lug connections to bus bar
- Insulation of secondary splices, copper or aluminum conductors
- Relocation of service, dig-in repairs, sheath repairs, environmental sealing for communication and other non-electrical applications
- Insulation of in-line conductor transition connectors-40 to 194 deg F temperature rating, 1 kV voltage rating
- UniShield®, wire shield, non-shielded, tape shield cable
- 11 in relaxed tube length, 7 in max connector length
- 0.55 min Dia cable for seal, 1.18 in Dia insulator cable or connector covers
- 2/0 AWG to 250 kcmil conductor size1 conductor, 250 kcmil, 2/0 AWG, 3/0 AWG, 4/0 AWG conductor size
Specifications
Standards/Approvals: ARRA Compliant|Buy American Act Compliant|RoHS 2011/65/EU|ANSI C1191.1