NSI Photocontrol, Button, Series: 3000, 208 to 277 VAC, 50/60 Hz, 3470 to 4620 W Tungsten, 2080 to 2770 VA Ballast, SPST, 2 min, 16 AWG Wire, Cadmium Sulfide Cell Sensor, 1 to 5 FC (ON)/3 to 15 FC (OFF) Ratio, Environmental Conditions: -40 to 140 deg F Operating Temperature, Flush Mount, Lexan, Black, 2 in H x 2-1/4 in D
Attributes
Features
Included
Specifications
Warranty
Attributes
Ballast Load2080 to 2770 VA
Contact FormSPST
Country of OriginCN
Environmental Conditions-40 to 140 deg F Operating Temperature
GTIN00786261600196
Sensitivity1 to 5 FC (ON)/3 to 15 FC (OFF) Ratio
Sensor TypeCadmium Sulfide Cell
Series3000
Tungsten Rating3470 to 4620 W
Type / StyleButton
Voltage Rating208 to 277 VAC
Frequency Rating50/60 Hz
ManufacturerNSi Industries
Features
Conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants
Photocell responds to the light spectrum near to that of a human eye
Delay of up to two minutes to prevent false switching due to light from passing vehicles, lightning and more
Control housing is weather resistant molded Lexan® with ultrasonically welded seams
Flush mounting through 11/16 in hole in post lantern or lighting fixture, 3/8 in NPT, stem 3/4 in long | Works with screw base CFL
On and Off time delay
Cadmium sulphide, conformal coated 1/2 in diameter cell
Three color coded, minimum 9 in wire leads, 16 AWG, rated for 105 deg C lead wires
Averages under 1 W power consumption | On fail mode
Included
3/4 in Flush Mount with Gasket and Nut
Specifications
Timing Range: 2 min
Warranty
5 Years
NSI 3002 3000 Button Photocontrol, 208 to 277 VAC, 3470 to 4620 W Tungsten, 2080 to 2770 VA Ballast, Flush Mount, Lexan