Controls 0-10 V electronic fluorescent ballasts or LED driver load typesPassive infrared motion detection with exclusive Lutron® XCT Technology for fine motion detection180 deg sensor field-of-view, up to 30 ft x 30 ft (9 m x 9 m) [900 ft2 (81 m2)] major motion coverage and 20 ft x 20 ft (6 m x 6 m) [400 ft2 (36 m2)] minor motion coverageOccupancy version can be set to auto-on/auto-off or manual on/auto-offAdjustable timeout (1, 5, 15, or 30 minutes)Adjustable settings for auto-on light level (occupied level) 100%, 50%, last light level, or locked preset light levelAdjustable sensitivity level High, Med, Low, MinOff warning fades lights to off over a period of 10 secondsAdvanced Maestro® dimmer features available (locked preset, fade-to-on, and fade-to-off, etc)Adaptive switching algorithm for extended relay lifeSmart ambient light detection (ALD)Works with a single standard mechanical 3 way switch or up to 9 companion switches (MA-AS or MSC-AS)High-end trim and low end trim to adjust maximum and minimum light levelsControls up to 25 ballasts or drivers (IEC 60929 Annex E.2 requires the ballast/driver to limit the current draw to 2.0 mA maximum)Selectable dimming curve- linear or square lawMiswire and incompatible load alertOn a single-tap, lights fade ON or OFF, on a double-tap, lights go to full ONLight levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached