In observance of the New Year, we will be closed on Wednesday, January 1st. We will reopen with normal business hours on Thursday, January 2nd.
loading content
Leviton ODS10-IDI
Leviton® Decora® ODS10-IDI 1-Pole Occupancy Sensor, PIR Sensor, 2100 ft Coverage, 180 deg Viewing, Wall Mount
Leviton ODS10-IDI
Leviton® Decora® ODS10-IDI 1-Pole Occupancy Sensor, PIR Sensor, 2100 ft Coverage, 180 deg Viewing, Wall MountIn Stock: 15More Info
|
In Stock: 15More Info
|
Product Description
The ODS10 uses passive infrared (PIR) detection technology to monitor a room for occupancy through a segmented fresnel lens. This specialized lens divides the field-of-view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights ON. The lights will remain ON as long as there is an occupant moving through the sensor zones.
Attributes
Documents
Features
Specifications
Attributes
ColorIvory
ControlManual On/Automatic Off
Control OutputManual On/Automatic Off
Country of OriginCN
Coverage2100 sq-ft
Dimensions1.75 in W x 1.85 in D x 46 in H
GTIN00078477010198
Lamp TypeFluorescent/Incandescent
Mounting TypeWall
Power Rating100/250 mW
Response Frequency50/60 Hz
Sensor TypePassive Infrared
Temperature Rating0 to 50 deg C
Time Delay30 s to 30 min
Type1-Pole
Type / Style1-Pole
Viewing Angle180 deg
Voltage Rating120/230/277 VAC
ManufacturerLeviton
Documents
Features
- Fits in standard wallbox and replaces 1-pole wall switch, gangable with other units
- Low profile design eliminates obtrusive "scanning-device" look
- Convenient pushbutton provides manual ON/OFF light switching at any time
- Two dual element PIR sensors used to widen detection range
- Segmented fresnel lens provides optimum sensitivity and performance designed with an extensive "minor motion" area where even slight body movements will be detected
- Vandal resistant PIR lens
- Horizontal field-of-view may be adjusted between 180 and 60 deg of arc by using integral blinders located on either side of the lens, no masking tape required
- Manual ON/auto OFF mode for installations where manual ON switching is required but auto OFF switching is still desired for CEC title T24 energy savings
- To comply with T24, red LED indicator light flashes when sensor detects motion to verify detection is active
- Time delay adjustment for delayed OFF time settings of 30 sec (for walking test), 10, 20 and 30 min, allows customized adjustments to maximize energy savings
- Light sensor adjustable ambient light override ranges from approximately 20 to 5000+ LUX to prevent lights from turning ON automatically during periods of ample natural light, increasing energy savings
- Light sensor enables the load hold OFF feature once level has been set
- Vacancy confirmation when the time out expires and the lights turns OFF, a 30 sec vacancy confirmation exists to turn the lights back ON
- False detection circuitry
- Presentation mode feature for slide or film presentations allows pushbuttons to turn lights OFF and keep them OFF while the room is occupied
- 1-unit can be used for 120 to 277 VAC lightingCompatible with both electronic and magnetic ballasts
- Relay switches at the zero crossing point of the AC power curve to ensure maximum contact life and compatibility with electronic ballasts
Specifications
Standards/Approvals: ARRA Compliant|Buy American Act Compliant|RoHS Compliant|UL Listed|CSA Certified|NOM Certified|FCC Certified|CEC Title 20/24 Compliant
Leviton® Decora® ODS10-IDI 1-Pole Occupancy Sensor, PIR Sensor, 2100 ft Coverage, 180 deg Viewing, Wall Mount
In Stock: 15More Info
|