EtherNet/IP to Modbus® TCP/IP4000 word databaseMultiple I/O connectionsStatus dataNode health10/100 MB ethernet port with auto cable crossover detection24 vdc nominal, 10 to 36 vdc allowed power supply with positive, negative, GND terminals300 mA at 24 vdc nominal and 610 mA at 10 to 36 vdc maximum current load15 G at 11 ms, 3-Axis (operational) and 30 G at 18 ms, 3-Axis (non-operational) shock rated5G at 10 to 150 Hz vibration ratedConfiguration (CFG) and error (ERR) communication, power (PWR) and hardware fault (FLT), network status (NS) EtherNet/IP class I/Class III connection, module status (MS) nodule configuration status, ethernet communication port link/activity and 100 mbit and serial communication port receive (RX)/transmit (TX) LED indicators10/100 Base-T half-duplex RJ45 connector ethernet port1500 Vrms at 50/60 Hz for 60 sec2500 Vrms port signal isolation per UL 1577 serial port communication signal uses RF modulation signal as isolation media - serial port isolation-40 to 176 deg F storage temperature