The LMR®-195 cable is substantially more flexible than RG142 and very comparable to RG58 flexibleAchieved through the use of high velocity gas injected closed cell foam dielectric, and bonded aluminum tape outer conductorLMR®-195 boasts lower loss than other RG58/RG142 type cablesThe bonded aluminum tape outer conductor is overlapped to provide 100% coverage, resulting in 0.9 dB RF shieldingThe intimately bonded structure and foam dielectric of LMR® cables provide excellent phase stability over temperature and with bendingThe high velocity dielectric results in superior phase stability as compared with RG58 and RG142 solid dielectric cables-40/85 deg C installation temperature range-70/85 deg C storage temperature range11.2 dB/100 ft attenuation at 915 MHz18.8 dB/100 ft attenuation at 2450 MHz29.9 dB/100 ft attenuation at 5800 MHz1/2 in minimum bend radius0.2 ft lb bending movement40 lb tensile strength15 lb/in flat plate crush2.5 kW peak power3000 VRMS jacket sparkLMR® 195 type conversion cable with reverse polarity, right angle RP SMA male type connector on radio side and standard N male plug connector on antenna sideConverts SMA connector type to N plug type and normally attaches to enclosure side bulkhead lightning protectorRP-SMA plug to N plug connection